FOSC Horizonal12 -96 cores fiber cable joint closure box CE Certicated
Mainly in a variety of structural cable for the overhead, piping, buried and other laying way through the direct and branch connection.
The box is made of imported reinforced plastic, high strength, corrosion resistance, terminal box for the structure of the cable terminal of the terminal room, the structure is mature, sealed and reliable, easy construction. Widely used in communications, network systems, CATV cable television, cable network systems and so on. The right side of the two into the two out of the box;
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Weight: 3kg(Erect type)
Dimension (mm): 51*22CM (H*D)
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ25
Sealing Structure : Heat shrinkable Sealing
Max Capacity of Core:144 cores
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40 to +85
Atmospheric pressure: 70106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
• The closure adopts heat shrinkable sealing structure.
There is one big oval shaped inlet/outlet port in base.
The big oval shaped port is used for the sealing of uncut
straight-through fiber cable, the small ports are used for
branch fiber cable and drop cable.
• It adopts engineering PC plastic with high-strength to
make the closure has longer life time and excellent
• The patented sealing structure keep good sealing
performance after re-entry and re-using.
• It is without cable fixing device.
• The bending radius of FOSTs meet the international standard.
• It could save the installation time and improve work efficiently.
• Suitable for bunchy&ribbon fibers
• Aerial, underground, wall-mounting, hand hole-mounting
pole-mounting and duct-mounting